Popular articles

Links

  • Electrically

  • Annealing is to restore the plasticity of wire, improve the tensile strength of wire, hardness, elastic limit, etc., the wire after annealing is called annealing wire. In the production process of annealing wire, it is very important to ensure the quality of the finished wire, make the wire have certain strength and suitable degree of soft and hard. The annealing temperature is between 800 ℃ and 850℃, and the length of furnace tube is lengthened appropriately for enough holding time.

  • The rest of the common application of galvanized iron wire is screen preparation or welding, construction mesh welding commonly used specifications for 2.0mm or 2.5mm wire diameter, welding size of 1M *2m or according to the height of the floor to customize the size. There is another is the use of electric welding net. The wire diameter of the welding net is relatively fine, and is divided into galvanized wire welding and galvanized welding. That is, galvanized wire is directly welded or black iron wire is welded into a net and then in the two galvanized.

  • 6: spray blade barbed rope is characterized by mechanical strength, adhesion, corrosion resistance, aging resistance, etc., which will greatly increase the service life of the barbed rope, uv resistance, aging resistance.

  • There are many categories of large rolls of galvanized wire, and different categories can be applied to different scenarios. The common application of galvanized iron wire is the application of the construction industry. One is the use of binding wire. Whether it is the binding of scaffolding or reinforcement, galvanized iron wire is needed to carry out. There are also 20kg or 50kg bundles of No. 18, No. 16, No. 14, No. 12, No. 10 galvanized coils.

  • In general, when exporting and exporting, the blade thorn rope will be packaged and sold, so that the volume occupied in the container is relatively small, which can be easily placed and will not occupy much place.

  • Ask the factory to provide the corresponding quality inspection report before packing. Cold drawing is a kind of material often used in our life, especially in the construction of buildings. Cold wire drawing is used more in building materials, cold wire drawing testing standards are also different. The strength of cold wire drawing is high, and it can be used in many aspects. Where plasticity is not required, only strength is required, such steel can be used.

  • Post time: 02-06-22
  • 3, pasture installation of barbed rope column to choose strong impact resistance zinc column, and coupled with oblique column fixed. Due to the large size of livestock, although there is a barbed rope to deter but inevitable collision phenomenon, in order to the stability of the fence recommended to use zinc steel post.
  • Materials of qualified quality should be kept marked for reference when used. In order to remove the surface film, surface inclusion and other defects on the surface of the large roll galvanized wire on the surface of the sedimentary layer to the local surface, it can be found and treated by conventional technology; Excess foam is caused by soaps and saponable fatty surfactants being brought into the tank. Moderate foam formation rates may be harmless. The presence of small homogeneous particles of large denier in the tank can stabilize the foam layer, but the accumulation of too many solid particles can cause explosion.

  • Galvanized iron wire is divided into hot galvanized wire and cold galvanized wire, the use of low carbon steel wire processing, after drawing molding, pickling rust removal, high temperature annealing, hot galvanized, cooling and other processes. Good toughness and elasticity, zinc content can reach 300 grams/square meter. It has the characteristics of thick galvanized layer and strong corrosion resistance. Galvanized iron wire can be cut off the tie wire used in the building, the length of 20cm 30cm 40cm, can be cut off according to requirements.

  • Cold drawing wire is a metal cold processing, with wire rod as raw material, that is, the mouth of the steel bar. Cold drawing wire is a product produced by a series of processes such as shell stripping, which is a common wire. In the development and production of metal materials, cold drawing wire is a very common material, its performance is good, the range of use is very wide, manufacturers in processing are the use of cold processing to produce.

  • The diameter of welded mesh wire for external walls is generally 2.2-ф4.0, and the mesh is generally 25-50.
  • Generally speaking, in dry main gas and indoor use, the thickness of galvanized coating is only 6-12μm, but under poor environmental conditions, the thickness of galvanized coating is 20μm, can reach 50μm. Therefore, environmental factors should be considered when choosing the thickness of galvanized layer. Galvanized layer after passivation treatment, can naturally form a layer of bright, beautiful color passivation film, can obviously improve its protective function, decorative.

  • barbed

  • barbed


  • Post time: 16-06-22
  • Some customers are more concerned about the quality of the problem, so for the service life is more important, thorn rope factory will generally recommend the use of high zinc thorn rope or stainless steel thorn rope.

  • Hot dip galvanizing is in the hot melt zinc liquid dip plating, production speed, thick but uneven coating, the market allows the low thickness of 45 microns, up to 300 microns above. It is dark in color, consumes more zinc metal, forms infiltration layer with base metal, and has good corrosion resistance. Hot dip galvanizing can be maintained for decades in outdoor environment.

  • galvanized

  • In the field of anti-theft, railway blade barbed rope is favored by people for its economic and practical, good resistance effect, convenient construction and other advantages, and railway blade barbed rope can also be sprayed into various colors, for their own yards and parks and other places to add a lot of luster. Many occasions require a barbed rope.
  • The strength, service life and hardness of positive and negative twisting rope are good. The tensile strength of steel wire is 1200N and that of iron wire is 350N. This service life is much longer than ordinary wire barbed rope.