Are you looking to keep your machinery free from any unwanted leakages but aren’t sure which rotary shaft seal is right for your needs? This guide will provide you with everything you need to know in order to select the right one for your application.

■Rust and corrosion inhibitors: Your engine’s internal parts can rust and corrode when exposed to acids and moisture. These additives create a protective film over your engine’s internal parts to help prevent such damage.

Table 4: Type of selected seal

1. Follow the instructions in the manual

When selecting industrial oil seals, it is essential to prioritize quality, durability, and compatibility with specific machinery and equipment. High-quality oil seals are designed to withstand the demanding conditions of industrial operation, providing reliable sealing solutions that contribute to the overall performance and safety of the machinery. Choosing reputable suppliers and manufacturers known for producing high-quality industrial oil seals is crucial to ensure the reliability and longevity of these critical components.

Fitting an oil seal

There is a British Standard laid down for the control of synthetic rubbers. BS 3574 (1989) helps to determine shelf life – for instance, Nitrile (NBR) and Polyacrylic (ACM) are Group ‘B’ rubbers and have a 7-year life, whilst Silicone (VMQ) and Fluoroelastomers (Viton®) are Group ‘C’ rubbers and have a 10-year shelf life. PTFE and Leather do not come into this category but like the others should be kept in the original packing for as long as possible away from direct light, dust, and humidity. Ozone, which can also be produced by battery-driven forklift trucks has a very bad effect on synthetic rubbers. Finally, protect the sealing lip – DO NOT hang the seals on nails, wire etc.

Hopefully after reading this article, you have a better understanding of why choosing the right materials for oil seals is so important. Remember, if you have any questions about industrial oil seals and supplies, please contact us and we would be more than happy to help.

In recent research, MWCNTs and carbon black were mixed with the butadiene/natural rubber to form a hybrid composite which gives very strong filler links by partial replacement of carbon black based on the m₁:m₂:X (m₁—MWCNT; m₂—reduction amount of carbon black; X-varies from 1 to 6) [40,64]. An internal blending mixer and two-roll milling were used to formulate the composites. The synergistic effect plays a major role in improving the abrasion resistance property due to the partial replacement of carbon black by adding MWCNTs in different ratios. The optimal ratio value of MWCNTs is 5 (parts per hundred of rubber) and 27.5 (parts per hundred of rubber) for carbon black with better resistant to abrasion compared to the matrix material [64]. The vulcanized hybrid composite material reinforced with MWCNT/carbon black at the ratio of 1:1 shows better mechanical properties, curing characteristics, and thermal conductivity. This shows a better tyre thread with an improved endurance life, less curing time, and improved thermal conductivity [42,64]. Fig. 4.4 shows the SEM and TEM images of uncured and cured rubber and Figs. 4.5 and 4.6 show the application of rubber nanocomposites in a tyre application.