stair slip pads

Sometimes, two different kinds of fluids leak from one chamber to another and gets mixed up. Here, this type comes as a boon. This is a metal inserted duplex type oil seal recommended on such assembly where mix-up of two different fluids is to be prevented.

Different Types of Oil Seals

Fluid Types - Various oil seals are able to withstand interactions with oils, fuels, grease, water and more. Knowing what type of fluid the rotary shaft seal will be in constant contact with will ensure the longevity of the seal and surrounding components.

Figure 14.1. Shaft seals (DuPont Dow Elastomers).

The basic principle of an oil seal is fairly straightforward. It is installed adjacent to the bearing, with the flexible lip against the rotating shaft and the casing pressed into the housing to hold the seal in place. It’s important that the sealing lip is lubricated to prevent it from overheating as a result of any generated friction. It’s also crucial to understand which type of seal is appropriate for your particular machinery. Before selecting your seal, consider the environment, temperature, pressure and shaft speed of your machine, as well as the type of medium the seal will come into contact with during operation. These considerations will all determine the size, colour, and type of lip material or sealing element to choose, and whether it can be sealed in or sealed out.

Clean all dirt and oil from the housing, and set the new seal in place with its open (spring) side towards the engine.