Current location:rubber door seal bottom >>Text

rubber door seal bottom

Hebei Qiuzhuo door bottom noise seal13123People have read

Introduction...

Tags:



Latest articles

Links

  • Barbed wire welding is the reason for the occurrence of black spots is because the welding wire action to be timely in the melting time, development should be appropriate, no argon, long time burning, current, distance, tungsten needle blunt, molten pool temperature is high, is the root cause of blackening. Continuous burning, is about the active welding machine energy selection, machine welding will appear black spots.
  • To remove surface active substances by matting with activated carbon. Or filtration to make the foam less stable, which are effective measures; Other measures should also be taken to reduce the amount of surface-active substances brought in to Z. The electroplating speed can be significantly reduced by the introduction of organic matter. Although the chemical formula is conducive to a high deposition rate, the coating thickness cannot meet the requirements after the organic matter is loaded, so activated carbon can be used to treat the tank.


  • Post time: 13-06-24
  • steel

  • 2, hot plating wire plating after processing

  • (5) We can surfacing the parts with wear and other failures, so as to obtain the surface surfacing layer with deep penetration, smooth surface and excellent performance.
  • The wire mesh is finished by fine welding of active welding equipment. The material can be divided into cold drawing wire, hot dip galvanized, cold galvanized, dip plastic and so on. To be used for bridge reinforcement, deck paving, building reinforcement, etc.

  • Galvanized wire coating rough, passivation film is not bright, bath temperature is too high. If the cathode current density is too high, zinc content in the bath is too high or sodium hydroxide and DPE content is too low; Solid particles or excessive foreign metal impurities in the electroplating solution can cause such problems. Solution: If the coating of large galvanized wire is rough, there may be solid particles in the plating solution. If the roughness of the part is severe, the current density may be too high.

  • blade

  • The material of wire mesh can choose galvanized wire, stainless steel wire, copper wire, coated wire, lacquer wire, etc., different materials are used in different fields, such as construction, culture, decoration, etc.

  • A lot of pet carriers are designed with a small box at the base, so that pets can clean up when they poo. At the same time, it is also convenient for pets to clean up. For example, if there is no box for leaking excreta, pet excreta will be on the ground, which is quite unsanitary. If you have a box it’s easy to take the box out and clean the trash so it doesn’t get all over the place, so it’s more hygienic.

  • Two: the color of the spray blade is beautiful and generous, and the color can be selected according to the use environment to integrate it with the surrounding environment. Plastic colors include grass green, dark green, black, red, white and so on.
  • barbed

  • Zinc-coated wire is dipped in molten zinc with high production speed and thick but uneven coating. The thickness allowed by the market is 45 microns, the color is dark, the consumption of zinc metal, and the base metal to form infiltration layer, good corrosion resistance, hot dip galvanizing can be maintained for decades in the outdoor environment.

  • The precautions of galvanizing wire in galvanizing are introduced in detail! When galvanized wire is galvanized, it is generally necessary to pay attention to the following problems: the duration of the protective effect of galvanized wire is greatly related to the thickness of the coating. Generally speaking, in the dry main gas and in indoor use, the thickness of galvanized wire galvanized layer only 6-12 μm “, and in harsh environmental conditions, galvanized wire galvanized layer thickness needs 20μm “to B height up to 50μm”. Therefore, the environmental impact should be considered when choosing the thickness of galvanized layer. Galvanized wire in galvanized, pay attention to the above problems, can be well galvanized, to ensure the quality of galvanized wire.

  • In order to figure out how many meters per kilogram of barbed rope, you also need to find out what type of barbed rope is, because different models will directly affect its weight.
  • Black iron wire application in the process, the main is through the hot metal billet rolling into six point five mm wire rod, and then put it in the drawing into a line of different diameter, the plant and then gradually narrow drawing plate aperture, cooling and annealing, plating process, such as making a variety of different specifications of the wire, the wire compared with ordinary black iron wire, will be more softer, The softness is also very uniform, the color is consistent, widely used in the construction industry, mining, chemical industry, welding mesh, welding hanger, reprocessing industry, etc.

  • 1. Electroplating process control

  • Benefits of using a pet cage:

  • Because there are many large livestock in pasture, and because of the large cost of development and easy to be destroyed by livestock, galvanized barbed rope is the best choice for enclosure. Pasture installation thorn rope is necessary,  wire mesh factory to introduce the role of pasture installation thorn rope。


  • Post time: 05-09-22
  • Decorative hook mesh size width generally does not span 2 meters. Generally, the length does not span 4m. It is difficult for workers to span 2m, and it is not good for galvanizing and plating. It can reach 6 meters in length, but it won’t cross 6 meters. Generally across 4 meters after the price will be significantly higher.

  • Post time: 11-05-23