flexible door sweep

The Importance of Door Bottom Brush Strips A Comprehensive Guide

3. Apply Adhesive If your V-shape weather stripping has an adhesive backing, peel off the protective layer. Carefully position the strip along the gap, pressing firmly to ensure it adheres properly. If it does not have an adhesive, you may need to use nails or staples for secure attachment.

1. Enhanced Safety The primary benefit is the increased safety they provide by effectively containing smoke and reducing fire spread.

5. Test for Leaks After installation, run the shower and check for any water leaks. Make adjustments as necessary to ensure a proper seal.

Regardless of the method, it’s important to ensure that the stair nose is flush with the tread, as any gaps can become tripping hazards.

Moreover, titanium dioxide is also used in rubber formulations to improve the processing and curing properties of rubber compounds. It acts as a catalyst in the vulcanization process, speeding up the cross-linking of rubber molecules and enhancing the overall performance of the final product. This results in rubber products that are stronger, more flexible, and better suited for a wide range of applications.

Le lithopone a été découvert dans les années 1870 par DuPont. Il a été produit par la Krebs Pigments and Chemical Company, entre autres¹. Il se faisait en différents grades, en fonction de la teneur en sulfure de zinc. Les qualités « bronze » et « or » contenaient 40 à 50 % de sulfure de zinc, ce qui les rendaient particulièrement couvrantes². Bien que ce pigment ait atteint son pic de popularité autour de 1920, il s'en produisait encore annuellement plus de 220 000 tonnes en 1990. Il est principalement utilisé dans les peintures, les pâtes et les plastiques³.

A great number of other brands with fancy names have gone out of the German market, because of some defects in the processes of manufacture. The English exporters, as a rule, offer three or four grades of lithopone, the lowest priced consisting of about 12 per cent zinc sulphide, the best varying between 30 and 32 per cent zinc sulphide. A white pigment of this composition containing more than 32 per cent zinc sulphide does not work well in oil as a paint, although in the oilcloth and shade cloth industries an article containing as high as 45 per cent zinc sulphide has been used apparently with success. Carefully prepared lithopone, containing 30 to 32 per cent sulphide of zinc with not over 1.5 per cent zinc oxide, the balance being barium sulphate, is a white powder almost equal to the best grades of French process zinc oxide in whiteness and holds a medium position in specific gravity between white lead and zinc oxide. Its oil absorption is also fairly well in the middle between the two white pigments mentioned, lead carbonate requiring 9 per cent of oil, zinc oxide on an average 17 per cent and lithopone 13 per cent to form a stiff paste. There is one advantage in the manipulation of lithopone in oil over both white lead and zinc oxide, it is more readily mis-cible than either of these, for some purposes requiring no mill grinding at all, simply thorough mixing with the oil. However, when lithopone has not been furnaced up to the required time, it will require a much greater percentage of oil for grinding and more thinners for spreading than the normal pigment. Pigment of that character is not well adapted for use in the manufacture of paints, as it lacks in body and color resisting properties and does not work well under the brush. In those industries, where the paint can be applied with machinery, as in shade cloth making, etc., it appears to be preferred, because of these very defects. As this sort of lithopone, ground in linseed oil in paste form, is thinned for application to the cloth with benzine only, and on account of its greater tendency to thicken, requires more of this comparatively cheap thinning medium, it is preferred by most of the manufacturers of machine painted shade cloth. Another point considered by them is that it does not require as much coloring matter to tint the white paste to the required standard depth as would be the case if the lithopone were of the standard required for the making of paint or enamels. On the other hand, the lithopone preferred by the shade cloth trade would prove a failure in the manufacture of oil paints and much more so, when used as a pigment in the so-called enamel or varnish paints. Every paint manufacturer knows, or should know, that a pigment containing hygroscopic moisture does not work well with oil and driers in a paint and that with varnish especially it is very susceptible to livering on standing and to becoming puffed to such an extent as to make it unworkable under the brush. While the process of making lithopone is not very difficult or complicated, the success of obtaining a first class product depends to a great extent on the purity of the material used. Foreign substances in these are readily eliminated by careful manipulation, which, however, requires thorough knowledge and great care, as otherwise the result will be a failure, rendering a product of bad color and lack of covering power.

Sulphate process. The ilmenite is reacted with sulphuric acid giving titanium sulphate and ferric oxide. After separation of ferric oxide, addition of alkali allows precipitation of hydrous titanium dioxide. The washed precipitate is calcined in a rotary kiln to render titanium dioxide. The nucleation and calcination conditions determine the crystalline structure of titanium dioxide (e.g. rutile or anatase).

Why all of a sudden is there so much interest in the safety of Titanium Dioxide?

Researchers from France and Luxembourg gave E171 (the much more food friendly name for Titanium Dioxide) in Europe and the United States, to lab rats in their drinking water for 100 days.

Of those rats, 40 per cent of the exposed rodents developed “preneoplastic lesions” or precancerous growths. The Titanium Dioxide also inhibited the immune systems of the rats and “accelerated” the growth of the lesions. France’s INRA agricultural research institute, which took part in the study, said in a statement.“These results demonstrate a role in initiating and promoting the early stages of colorectal cancer formation,” though it said no conclusion could be drawn about later phases of cancer, or of any danger to humans……….(not till they test it on us!!)

The results of the study were published in the Nature journal Scientific Reports.

What is an exposure route? 

In Home Care products, the presence of titanium dioxide is declared in line with local regulations, which can vary across the world. In some countries, titanium dioxide is not declared if only a small amount of the ingredient is used. In other countries titanium dioxide is grouped under ‘colourants’ in the ingredients list. In Europe, regulation requires all home care ingredients to be disclosed through a supporting website. You can find our product ingredient information page by visiting ‘

Magnesium oxide (MgO). It is used as a curing agent and an acid scavenger in solvent-borne polychloroprene adhesives. It is a white powder with a high melting point. It has a greater ability to reflect visible light more efficiently than titanium dioxide

It is a white crystalline powder, which is a mixture of zinc sulfide and barium sulfate. The more zinc sulfide it contains, the stronger the hiding power and the higher the quality. The density of lithopone is 4.136~4.34/cm3 and it is insoluble in water. It easily decomposes when exposed to acid to produce hydrogen sulfide gas, but does not work when exposed to hydrogen sulfide and alkaline solutions.

Promotion of noncancerous tumors