Latest articles



Popular articles

Links

  • The spring operating at high temperature requires that it can adhere to the elastic limit and good creep resistance at high temperature. In addition, the forming process and heat treatment process of spring steel wire should also be considered. Cold drawn spring steel wire and oil quenched tempered spring steel wire are directly around the supply of steel wire spring, spring forming after the elimination of stress directly used.

  • The blade gill net of plastic paint is formed after rust protection processing after the manufacture of blade type barbed iron wire rope. The periphery of blade gill net should have good rust prevention effect, the peripheral processing should be beautiful, and can be of good practical value, more convenient installation, higher cost performance and other advantages. Plastic paint is a common electrostatic coating method, which can be fixed on the periphery of chicken wire or wire plate. After two hundred heat treatment, plastic paint or powder paint is glued to the surface of wire plate. These blade gill nets coated with plastic paint are generally used on indoor boxes. The coating processing does not take too long, mainly because the effect of rust prevention and corrosion protection is quite good, much better than the general material.

  • The production and processing process of the blade thorn rope is complicated, which requires the cooperation of all departments, and the production cycle is relatively long. Whether galvanized rope or stainless steel rope, because of the relatively simple structure, the degree of mechanization in the production process is relatively high, so it is also a relatively big difference in price.

  • pet

  • dog

  • The vertical distance between the lower edge of the Nestor roller cage and the upper edge of the reinforced concrete protective fence is 0.05m. Longitudinal reinforcement adopts hot-dip galvanized netting, double-twist weaving process, barbed wire 2.2mm, main line 2.5mm, netting joint card adopts galvanized steel plate stamping or Q235 carbon steel plate stamping for galvanized.

  • hook

  • Pet carrier is generally made of high quality iron wire, low carbon steel wire, stainless steel wire welded, its characteristics are beautiful, lightweight, foldable, easy to store. Pet carrier appearance treatment is generally: cold galvanized, hot galvanized, spray, dip plastic, chrome plating, nickel plating and other methods. Pet cage is mainly used for family pet breeding and protection.

  • barbed

  • Stainless steel wire drawing is a metal working (stainless steel) process, is a popular surface treatment technology in the stainless steel and aluminum products industry today. It is the effect of drawing stainless steel and aluminum products. So galvanized wire and stainless steel wire are two different products. Defects such as surface film and surface inclusion can be found and treated by conventional techniques in order to locally remove the surface film and surface inclusion from the surface of galvanized iron wire. Excess foam is formed when soap and surfactants such as saponified fats are brought into the tank.

  • Galvanized wire according to the production technology can be divided into: hot galvanized wire, electroplating wire hot plating: 8# — 36# (3.8mm,0.19mm) electroplating: 8# — 38# (3.8mm-0.15mm)

  • Hexagonal


  • Post time: 17-05-23
  • galvanizing


  • Post time: 07-06-24
  • Large roll galvanized wire is processed by low carbon steel wire rod, through drawing molding, pickling rust removal, high temperature annealing, cooling and other processes. Large roll galvanized wire electroplating temperature should be controlled in 30-50℃. Because of the strong corrosivity of chloride ions in bath, quartz glass heater is generally used. Continuous production does not need heating, but need cooling cooling.

  • (4) can withstand a large range of deformation, but still do not collapse. Play the role of fixed thermal insulation;
  • steel

  • Hexagonal guardrail network custom structure is closely combined, the appearance is not concave and convex, with satisfactory corrosion resistance, oxygen resistance and other capabilities. Construction without a lot of manpower and material resources, can be operated on site.

  • ③ The galvanized iron wire shall not be damaged when it is tightened.
  • Zinc dipping time should be adjusted according to the thickness of wire diameter. The method of adjustment is the length of the distance between the lead screw on the zinc pot and the ceramic sinking roller. Thick wire diameter zinc dipping time should be long, fine wire diameter zinc dipping time should be short, zinc dipping length in the range of 2~3.5m, which is also to reduce the zinc consumption of steel wire galvanized, is an aspect of maintaining the uniformity of zinc layer.

  • Galvanized wire drawing is more common in our life, galvanized wire drawing refers to the production of galvanized iron wire after a series of processes such as shell stripping. The production process of galvanized wire drawing is more complex, and a series of problems may occur if there is a slight mistake. When the wire factory is engaged in the production of galvanized wire drawing, it is necessary to remove all the tools and piles that hinder activities on the work site and equipment.

  • Open pit coal mine due to poor air quality, a variety of harmful heavy metals are also more, so the corrosion strength of barbed rope products is particularly large, when using galvanized barbed rope must choose hot plating or plastic coated galvanized barbed rope, although the price is slightly higher, but in the long term development is more appropriate. Besides, when the barbed rope is installed near the coal mine, the pile foundation should be fixed to prevent the barbed rope from falling down due to soil erosion, thus losing the protective effect.

  • Cold galvanizing is also called electric galvanizing. It is the use of electrolytic equipment to remove oil, pickling, and then put the pipe into the solution of zinc salt, and connect the anode of the electrolytic equipment, place zinc plate on the opposite side of the pipe, and connect the positive pole of the electrolytic equipment to the power supply. A layer of zinc is deposited on the pipe fitting by directional movement of an electric current from the positive pole to the negative pole. Cold plated pipe fitting is processed before galvanizing.

  • Hot dip galvanized hexagonal net is made of low carbon steel wire by mechanized braided welding and then by hot dip zinc treatment. The net color is white and shiny, thick zinc layer, uniform mesh, flat mesh surface, solder joint tension resistance, high corrosion resistance. The surface of the steel wire is usually protected by hot-dip galvanizing, and the thickness of the galvanized protective layer can be made according to the requirements of customers. Hot-dip galvanizing hexagonal net is another kind of twisting mesh corresponding to the galvanizing hexagonal net.

  • ⑹ can not open the groove 1 ~ 6mm thick metal sheet single-side welding double-sided forming.

  • Hexagonal

  • The appearance quality of cold-drawn low carbon steel wire in each inspection lot shall be all visually inspected. The appearance of steel wire shall not have cracks, burrs, corrosion and mechanical damage affecting mechanical function. Cold-drawn low carbon steel wire with unqualified appearance can be used in engineering after treatment and inspection.

  • No matter how old dogs are, they seem to love to touch noses with people and other animals. In fact, dogs touch noses as a way of socializing, just like humans shake hands and hug when they meet. But dogs don’t nuzzle every human or every animal. They pick and choose who to nuzzle. If they don’t like you, or don’t know you at all, they won’t touch your nose. However, adult dogs will touch almost every puppy’s nose, and they will not only touch the puppy’s nose, but also smell the puppy’s body.


  • Post time: 07-02-23