Popular articles

  • 2. Quantity and packing
  • When the barbed rope is used, it is calculated according to the length, while when purchasing the barbed rope, it is calculated according to the weight of the barbed rope, which causes the confusion of users’ difficulty in counting the quantity of purchase. Therefore, it is necessary to understand clearly that there are less meters per kilogram of the barbed rope. How much does a barbed rope weigh in a meter? These two problems, the purchase of barbed rope becomes very simple.

  • During this process, each time the wire is pulled over, the surface hardens due to the high friction temperature. So basically every time you pull it you have to annealing it in the furnace. On the one hand, it is to reduce the surface hardness. On the other hand, during the process of wire pulling, only the surface is deformed, and the center is unchanged. So there’s a lot of stress inside. Therefore, it is necessary to rely on annealing to eliminate the internal stress, so that the wire becomes soft again to eliminate the stress before being drawn again.

  • 3. The structure of the dog cage should be reasonable
  • PVC


  • Post time: 11-05-23
  • dog

  • ① The diameter of galvanized iron wire for pulling should not be less than 4mm, and the diameter of galvanized iron wire for binding should not be less than 2.6mm.
  • (8) galvanized wire coated hexagonal mesh is coated with a layer of PVC protective layer on the surface of galvanized iron wire, and then woven into a variety of specifications of hexagonal mesh. This layer of PVC protective layer will greatly increase the service life of the net, and through the choice of different colors, so that it can be integrated with the surrounding natural environment.


  • Post time: 10-02-23
  • galvanizing

  • Aliases: Gabion mesh, heavy hexagonal mesh, ecological mesh, wire mesh, etc.
  • There are many important details that need to be paid special attention to during the production of barbed rope or blade barbed rope by the barbed rope factory. If any improper, it will cause unnecessary losses.

  • C, coating uniformity: galvanized layer is basically uniform with copper sulfate solution test etched five times without exposing iron.
  • Compared with other galvanizing processes, galvanized steel wire has low cleaning requirements before plating. However, under the current trend of increasing the quality level of galvanized layer, some pollutants brought into the plating tank are obviously harmful. Because cleaning galvanized coating wastes a lot of time and reduces production, it is very important to properly clean and effectively rinse the substrate before electroplating.

  • annealed

  • The more turns thorn rope, at the same time will shorten some use the length, but its tensile strength is improved and barbed wire manufacturer production products general laps for the 3 ring, very few customers to use the product requires 5 laps, this time both in processing fees and use the length is calculated need extra.

  • Generally speaking steel does not rust easily with chromium content of 10.5%. The higher the content of chromium and nickel, the better the corrosion resistance, such as 304 material nickel content in 8-10%, chromium content of 18-20%, such stainless steel in general is not rust.
  • 2. Eliminate the caked zinc residue at the zinc liquid surface

  • Thorn rope installation must be determined to be a straight line, straight installation is beautiful and save materials so that the installation of barbed wire net effect is better.

  • Raw material of wire mesh sheet cold drawn low carbon steel wire base material can choose low carbon steel hot rolled disk bar or hot rolled smooth steel bar. The base material number and diameter of cold-drawn low carbon steel wire can be confirmed according to the rules in the table below. During the cold drawing process, the surface shrinkage rate of each drawing should not be greater than the wire mesh before cold drawing. Annealing shall not be carried out during wire drawing. If butt welding is required, the same production unit and base material of the same number should be selected. The appearance quality of wire mesh should not affect wire drawing. When the welding function is poor or brittle fracture occurs, special inspection should be carried out according to relevant standards.

  • Wire mesh production of general selection of low carbon wire, after fine and accurate active welding equipment processing, the selection of galvanized process surface treatment. After the completion of the product, the net surface is smooth and regular, good integrity, strong and consolidated, even if part of the choice or pressure will not appear lax phenomenon.


  • Post time: 02-03-23
  • The production of large rolls of galvanized wire iron can be divided into two categories, is directly from the iron ore after iron stroke exercise out of the metal, the composition of the ore is iron oxide, silica and other miscellaneous stone.

  • barbed

  • Did not do the adhesion test of powder spraying or fluorocarbon spray on the packaging galvanized wire, but there are two points for reference: one, in the sealed or air circulation environment, non-metallic volatiles can corrosion zinc coating; Second, zinc above 230 degrees (c) will brittle the base metal. After powder spraying and fluorocarbon spraying, it is necessary to bake at a higher temperature and in a sealed environment, causing rapid corrosion of zinc, resulting in loose corrosion film resulting in decreased adhesion of coating, and even leading to brittle situation of steel wire.

  • (3) Can realize butt joint, Angle joint, lap joint, T joint and other joint forms of welding.
  • The wire mesh is composed of low carbon steel wire or medium carbon steel wire, high carbon steel wire or stainless steel wire. There are two kinds of manufacturing technology of steel wire mesh, one is the weaving method, the other is the welding connection, the formation of grid.

  • 1: according to the different color of the sprayed blade barbed rope, its price is 2000-2200 yuan higher than the ordinary blade barbed rope, but the cost performance of the sprayed blade barbed rope is much higher.

  • First, the concept is different

  • Many pet cages are designed with a small box in the base, so that pets can clean up when they poop, but also convenient for pets’ health. For example, if there is no excreta box, pet excreta will be on the ground, which is quite unhealthy. If you have a box, it’s easy to take the box out and wash the trash away so it doesn’t get all over the place, so it’s more hygienic.


  • Post time: 06-07-22
  • Compared with the traditional barbed and twisted barbed rope, the raw material cost is relatively high because of the relatively complex process.

  •  galvanized

  • 4, barbed rope fence and culvert intersection, such as the ditch is narrow, barbed rope barbed rope fence can be directly across the ditch is wider, barbed rope barbed rope fence is difficult to cross, can take bridge, channel processing method.
  • In the process of using hot-dip galvanized wire, we should do a good job of daily overhaul and maintenance, try to avoid the destruction of the surface galvanized layer, and extend the service life of the wire. In addition to user binding, building special electric galvanized shaft silk production factory can also be used to decorate gardens and buildings, make it more beautiful and have higher taste.

  • After the wire mesh appears black spots, you can choose the appearance of treatment to deal with this problem, such as galvanized, paint, dip plastic to deal with, after the appearance of the welding mesh surface smooth and bright, beautiful and generous.

  • It is generally believed that the positive and negative twisting wire wire is not as durable as the thickness, common sense thinks so, but the positive and negative twisting wire wire is used in hot galvanized steel wire, which is more than 3 times the tensile strength of the iron wire, and the zinc amount is not lower than the hot plated wire