non slip drainage mats

Regular inspection and replacement of oil seals are also necessary to prevent leakage and maintain the efficiency of the machinery. Over time, oil seals can wear out due to constant friction and exposure to harsh conditions, leading to leaks and potential damage to the equipment. By monitoring the condition of oil seals and replacing them as needed, operators can prevent costly downtime and repairs.

Leather is probably the oldest of the lip materials still in common use, but the move towards mass production methods has seen a massive increase in the development of synthetic rubbers which lend themselves to accurate and repeatable injection and compression moulding. Nitrile (NBR) is still by far the most common elastomer for “normal” use, whilst Viton® (FKM/FPM) is rapidly replacing Polyacrylate (ACM) and Silicone (VMQ) for high-temperature applications. Viton® also has high resistance to abrasion and chemical attack making it a preferred elastomer. Recent developments in the use of PTFE for Rotary shaft seals has caused widespread interest particularly for high-speed shaft rotation or poor lubrication applications.

When included, the garter spring applies pressure to the sealing lip against the shaft, ensuring a tight seal. The choice of material, like that of the case, largely depends on the environment of use.

Figure 6: Recommended housing bore chamfers (shouldered bore)

Installing and replacing the 75x100x10 oil seal is a straightforward process that can be done by maintenance personnel with basic mechanical skills. It's important to ensure that the shaft and housing where the oil seal will be placed are clean and free of any debris or damage. Proper lubrication of the shaft is also crucial to prevent premature wear of the oil seal.

In engine applications, square rubber gaskets are used to seal various components such as valve covers, oil pans, and intake manifolds. These gaskets help prevent oil and fuel leaks, ensuring the engine operates smoothly and efficiently.

Choosing the wrong materials for an oil seal may result in premature wear, lip hardening, cracks, swelling, and subsequent expensive damage to the machinery in which the seal is used. It is therefore vital to gather all relevant data and consult with experts before purchasing to match the right type of oil seal with your application.

Lubricant Amount - Seals will always perform best when lubricated, however in some machines there are more likely to be dry spells. For these cases, selecting a leather or PTFE seal will be beneficial, as both can operate with less lubrication than others.