rubber bed matt

The basic scenario of resistive switching in TiO₂ (Jameson et al., 2007) assumes the formation and electromigration of oxygen vacancies between the electrodes (Baiatu et al., 1990), so that the distribution of concomitant n-type conductivity (Janotti et al., 2010) across the volume can eventually be controlled by an external electric bias, as schematically shown in Figure 1B. Direct observations with transmission electron microscopy (TEM) revealed more complex electroforming processes in TiO₂ thin films. In one of the studies, a continuous Pt filament between the electrodes was observed in a planar Pt/TiO₂/Pt memristor (Jang et al., 2016). As illustrated in Figure 1C, the corresponding switching mechanism was suggested as the formation of a conductive nanofilament with a high concentration of ionized oxygen vacancies and correspondingly reduced Ti³⁺ ions. These ions induce detachment and migration of Pt atoms from the electrode via strong metal–support interactions (Tauster, 1987). Another TEM investigation of a conductive TiO₂ nanofilament revealed it to be a Magnéli phase Ti_nO_2n−1 (Kwon et al., 2010). Supposedly, its formation results from an increase in the concentrations of oxygen vacancies within a local nanoregion above their thermodynamically stable limit. This scenario is schematically shown in Figure 1D. Other hypothesized point defect mechanisms involve a contribution of cation and anion interstitials, although their behavior has been studied more in tantalum oxide (Wedig et al., 2015; Kumar et al., 2016). The plausible origins and mechanisms of memristive switching have been comprehensively reviewed in topical publications devoted to metal oxide memristors (Yang et al., 2008; Waser et al., 2009; Ielmini, 2016) as well as TiO₂ (Jeong et al., 2011; Szot et al., 2011; Acharyya et al., 2014). The resistive switching mechanisms in memristive materials are regularly revisited and updated in the themed review publications (Sun et al., 2019; Wang et al., 2020).

Lithopone, a white pigment composed of a mixture of barium sulfate and zinc sulfide, is commonly used in the leather industry as a coloring agent. Leather suppliers around the world rely on lithopone to achieve the desired color and finish on their products.

Hiding power

Lithopone can also be used as raw material of putty to fill gaps; Adding 20% lithopone to the concrete to make artificial quartz without harming its light resistance and solidification; It can improve the impact resistance and electrical performance when used in fire safety polyester chemicals; These are the raw materials of audio vinyl records used for turbojet engine dye and thermal insulation coating and insulating layer.

What's the deal with titanium dioxide?

Lithopone 30% increases extruder performance and reduces processing costs, improves quality and is suitable for masterbatch for injection of Polyolefins, ABS, Polycarbonate, Polypropylene, Polyethylene, Polystyrene, single layer films, multi-layer films and for white, coloured and filled masterbatch. The combination of Lithopone 30 with TiO2 results in improved mechanical properties including higher elongation values and better impact resistance. 

≤0.4

Drivers

One of lithopone's outstanding characteristics is its exceptional whiteness. The pigment has a brilliant white color that brings vibrancy and brightness to any application. Whether you are producing paints, coatings, plastics, rubber or printing inks, lithopone will ensure that your end product stands out with its unrivaled pure white shade.

Another important application of titanium dioxide is in the production of sunscreen and other skincare products. Titanium dioxide is a key ingredient in many sunscreens due to its ability to reflect and scatter ultraviolet (UV) radiation, providing protection against harmful UV rays. Manufacturers of titanium dioxide for sunscreen products often use special coatings and surface treatments to enhance its UV-blocking properties.