Popular articles

Latest articles

  • In order to pack and bundle galvanized wire on the surface of the deposit layer to remove the surface film, surface inclusion and other defects can be found and treated by conventional technology; Excess foam is caused by soaps and saponable fatty surfactants being brought into the tank. Moderate foam formation rates may be harmless. Small homogeneous particles of large denier present in the tank can stabilize the foam layer. To remove surface active substances by matting with activated carbon. Or filtration to make the foam less stable, which are effective measures; Other measures should also be taken to reduce the intake of surfactant. The electroplating speed can be significantly reduced by the introduction of organic matter. Although the chemical formula is conducive to a high deposition rate, the coating thickness cannot meet the requirements after the organic matter is loaded, so activated carbon can be used to treat the tank.


  • Post time: 07-03-23

  • Post time: 06-03-23
  • Some customers may not use the blade barbed rope immediately when they buy it, some are retail, and some are temporarily unavailable for the construction site. At this time, customers need to follow up the characteristics of the blade barbed rope for storage.

  • Some herdsmen avoid the intrusion of wild animals and other people’s livestock and from time to time to increase the grassland grassland stainless steel barbed rope fence net, so that the grassland grassland stainless steel barbed rope fence net has become a barrier to all kinds of wild animals. It is in herders’ interests to increase the number of their livestock, but consciously raising barbed ropes not only directly frightens and harms wildlife, but also cuts them off from food and migration.

  • Wire diameter: 0.6 (mm)
  • 1, galvanized silk mesh molding sheet must be packed with flat hard materials, to avoid improper packaging and eternal deformation. It is important that each package and roll of raw material be marked with product name, standard, quantity, trademark, lot number, manufacturer, date of production, packing symbol, inspector code and inspection certificate.

  • 1. The diameter of the raw material and the thickness of the diameter are directly affected;

  • Knife width: 6 (mm)

  • Post time: 28-12-22
  • Railroad

  • In the calculation process of 12*14 specifications of barbed rope, it can not be calculated according to the above calculation formula, because first of all, two specifications of raw materials are used, the thinner the wire diameter, the higher the processing cost. Generally speaking, a kilogram of 12*14 barbed rope can reach about 7.5 meters, and the ratio of warp wire to barbed rope cannot be calculated according to the traditional ratio of 7 to 3. The specific use of how much wire and silk need to go through a series of professional measurement but also increase the loss of raw materials and other factors to calculate. Thorn rope factory will also according to customer needs to calculate the reasonable amount of customer use.


  • Post time: 07-09-22
  • Hexagonal


  • Post time: 24-05-23
  • The steel mesh improves shock resistance and crack resistance. The longitudinal and transverse steel bars of the welded steel mesh constitute a network structure. Therefore, the bond anchorage between the steel mesh and concrete is good, and the load distribution is uniform, which significantly improves the earthquake resistance and crack resistance of the reinforced concrete structure. According to the practice test, the cracks of welding net are reduced by more than 75% than that of manual binding net. Greatly reduce the unnecessary cost of the construction process, shorten the construction cycle, the use of steel wire mesh is simple and convenient, easy to transport.

  • The electrode is a kind of material that the coating (that is, the coating) is uniformly and centrally applied on the welding core outside the metal welding core. The electrode is composed of two parts: the welding core and the coating. The welding core is the metal core of the electrode. In order to ensure the quality and performance of the weld, there are strict regulations on the content of various metal elements in the welding core. Electrode structure: portable non – electrode, including cylinder, tube, sleeve plug. The electrode is made of metal or metal oxide powder, such as high heat agent and additives. Paper tube is generally used for drug pipe, and metal tube can also be used for different welding parts and use environment. The plug is at the end of the electrode, which is the clamping part that matches the sleeve during welding and prevents the flux from leaking out of the tube.


  • Post time: 01-09-22